+
+
+
+
contact us now. BOOK ONLINE OR CALL 1-800-324-2305

Electrostatic Air Filters are useful, why ?

Electrostatic air filters are characteristically square in shape and between 1/2 and 1-inch thick. They're accessible in different dimensions, just like ordinary one-off fiberglass filters, to fit a wide range of HVAC system vents and cold air returns. However their outside frames are typically made of aluminum, compared to the cardboard frames of disposable fiberglass filters because of the electrostatic filters are reusable. The filtration media in an electrostatic air filter has some layers. On the air duct side of the filter there are ordinarily two to six layers of woven polyurethane and polypropylene fibers, which look much like the fiberglass filtration media of disposable filters. On the vent side of the filter there is usually a thin polyester mesh. Both sides are often covered with aluminum grates with chain-link style patterns. These grates don't actually filter particles from the air, but give the filters shape and rigidity.

How does it work?

The main reason of the electrostatic air filter's effectiveness is the polyurethane and polypropylene blends used in the filtering material. The fibers have been formulated. That’s why when air passes by them, they generate strong static charges. Separate layers of filtration material also receive opposite charges (positive and negative). As long as positively charged particles are attracted to surfaces with negative static charges and vice versa, the filtration media can practically attract airborne particles like a magnet and hold on to them so long as the filter is cleaned. It first passes through a synthetic filter layer with a positive static charge, when a particle of dust, mold, fungi or any other airborne matter comes from the HVAC system and through the ducts toward the filter. This positive charge gets transferred to the airborne particle. Then the particle passes through a layer with a negative charge, and it is attracted to that layer's surface. The more layers of oppositely-charged filtration media there are in the filter, the more effectively it can prevent airborne particles from entering the room.

Cleaning and reusing

Electrostatic filters are made from reliable materials and are usually several times the cost of an equivalent disposable filter, so they're often used for many years. It's a good idea to clean accumulated particles from the filtration media regularly. To do this, the filter must be removed from the vent or cold air return. The toilless way to clean an electrostatic filter is to use a vacuum cleaner hose attachment to absorb dust and dirt immediately of the duct side of the filter. If this is done on a regular basis, deeper cleaning may never be needed. But if the filter is very dirty, it can be flushed clean with a garden hose. However, it's significant to spray the filter with water going in the opposite direction of the air flow. That way, accumulated particles can be flushed out of the filter without unintentionally driving them deeper into the filtration material.